VEM VEMoDRIVE VSI 2.0 HD, Instruction Manual

Page: 154 / 244

152 CG Drives & Automation, 01-5326-01r3b
Fig. 113
AnIn1 Enable [513A]
Parameter for enable/disable analogue input selection via
digital inputs (DigIn set to function AnIn Select).
Communication information
AnIn2 Function [514]
Parameter for setting the function of Analogue Input 2.
Same function as “AnIn1 Fc [511]”.
Communication information
AnIn2 Setup [515]
Parameter for setting the function of Analogue Input 2.
Same functions as “AnIn1 Setup [512]”.
Communication information
AnIn2 Advanced [516]
Same functions and submenus as under “AnIn1 Advan
[513]”.
Communication information
Default: On
On 0 AnIn1 is always active
!DigIn 1 AnIn1 is only active if the digital input is low.
DigIn 2 AnIn1 is only active if the digital input is high.
Modbus Instance no/DeviceNet no: 43210
Profibus slot/index 169/114
EtherCAT index (hex) 4c8a
Profinet IO index 19594
Fieldbus format UInt
Modbus format UInt
Default: Off
Selection: Same as in menu
[
511
]
Modbus Instance no/DeviceNet no: 43211
Profibus slot/index 169/115
EtherCAT index (hex) 4c8b
Profinet IO index 19595
Fieldbus format UInt
Modbus format UInt
AnIn change
100%
63%
Original input signal
Filtered AnIn signal
T
5 X T
513A AnIn1 Enabl
Stp On
514 AnIn2 Fc
Stp Off
Default: 4 – 20 mA
Dependent on Setting of switch S2
Selection: Same as in menu
[
512
].
Modbus Instance no/DeviceNet no: 43212
Profibus slot/index 169/116
EtherCAT index (hex) 4c8c
Profinet IO index 19596
Fieldbus format UInt
Modbus format UInt
Modbus Instance no/DeviceNet no:
43213–43220,
43542,
43552
Profibus slot/index
169/117–124,
170/191,
170/201
EtherCAT index (hex)
4c8d - 4c94,
4dd6,
4de0
Profinet IO index
19597-19604,
19926,
19936
Fieldbus format
See [5131] - [5137].
Modbus format
515 AnIn2 Setup
Stp 4-20mA
516 AnIn2 Advan
Stp
9(0R'ULYH 96, 9(0 U