Telex Azedit Software Manual Download Page 157

Page: 157 / 182

Telex Communications

157

Master Controller Status

Use

Master Controller Status

to view connection status and data communication errors between the master

controller and the configuration PC. You can also use this to upgrade the master controller firmware.

Note:

In an ADAM or ADAM CS intercom system this item displays status information about the active master

controller card, and the standby master controller card status can be viewed with the Standby Controller item on the
Status menu.

Master Controller Versions

Use

Master Controller Versions

to check the Master Controller firmware version. You can also use this to upgrade

the Master Controller firmware.

Maximize

expands the AZedit window to fill the entire screen.

Merge

Use

Merge

to combine the contents of a previously saved file into a file that you are currently editing. Typically, use

merge with partial setup files that have been previously saved using partial save.

Merge is available in the File menu and also via the merge button.

Minimize

closes, but not exits, the AZedit window. The window is reduced to an icon in the taskbar.

Summary of Contents for Azedit























































































































































































Search results

Summary of Contents for Azedit

Reviews:

Related manuals for Azedit

Brands by name

Popular brands

Telex Azedit, Software Manual

Search results

Summary of Contents for Azedit

Reviews:

Related manuals for Azedit

Brands by name

Popular brands