Telex Azedit, Software Manual

Page: 127 / 182

Telex Communications 127
1. From AZedit, click UPL.
The User Programming Logic setup screen appears.
2. Scroll through UPL Statements list checking to see if the old port is included in any of the Input or Output
columns.
If the old port is included, double-click the UPL Statement and change the port setting from the old port to
the new port.
Check Dim Tables Participation
1. From AZedit, click Dim.
The Inter-panel Dim Table setup screen appears.
2. Check all Dim Table ports currently set up in your intercom system.
If the user is a member of Dim table, remove them from the Dim Table. If you know the new port number to
which you are reassigning the user, select that port and add the user to a Dim table on that port.
Check for Forced or Inhibited Crosspoint Participation
1. From AZedit, click XPT.
The Crosspoint Status setup screen appears.
2. Check all Crosspoints for the old port. If the old port is setup with force or inhibit, Release the port.
Search for Key Assignments
The key assignment search is an efficient and effective tool in searching for key assignments throughout the AZedit
application.
To use Search, do the following:
1. Press Ctrl+F on the keyboard.
The Search for Key Assignment screen appears.
OR
From the Edit menu, select Search for Key Assignment.
The Search for Key Assignment screen appears.
OR
From the tool bar, click the Search button.
The Search for Key Assignment screen appears.
2. From the Key Type list, select the type of key assignment you want to search (for example, ports).
3. From the list on the right, select the port, party line, etc. you want to search.