Telex Azedit, Software Manual

Page: 64 / 182

Telex Communications 64
However, you can control how many IFB's are available for
use by changing the intercom configuration settings.
Alpha list column
The Alpha column displays the name assigned to the IFB.
Default names are IF01, IF02 etc. You can change these
names to ones that are more meaningful to keypanel
operators.
1. Click the row where you want to change the Alpha
name, then press Ctrl + F12.
The Edit Alpha/Description screen appears.
DIM list column Displays the Dim Level you set in the Edit IFB screen.
No indicates that no dimming values have been set and the
program audio will be completely muted during IFB operation.
LC list column The LC column displays the scroll enable settings for the IFB:
LC = Local
TK = Trunk
AE = AZedit
For each type of scrolling, the letters appear green if that type
of scrolling is enabled, and brown (or red when selected) if that
type of scrolling is disabled.
TK list column The TK column displays the scroll enable settings for the IFB:
LC = Local
TK = Trunk
AE = AZedit
For each type of scrolling, the letters appear green if that type
of scrolling is enabled, and brown (or red when selected) if that
type of scrolling is disabled.
AE list column The AE column displays the scroll enable settings for the IFB:
LC = Local
TK = Trunk
AE = AZedit
For each type of scrolling, the letters appear green if that type
of scrolling is enabled, and brown (or red when selected) if that
type of scrolling is disabled.
Input list column The Input column displays the port settings that are set up for
each IFB.
Alpha list column The Alpha column displays the port settings you set up for
each IFB
Output list column The Output column displays the port settings you set up for
each IFB
Alpha list column The Alpha column displays the port settings you set up for
each IFB
Gain list column
The Gain column displays the analog output gain for the
intercom port that has been designated as the IFB Output. If
the IFB listening device that is connected to the output port
does not have a volume control, you can adjust the analog
output gain to suit the listener's preference. The analog output
gain be adjusted on the Analog Input / Output Gains screen or
from an LCP-102 that is operating in PAP mode.
NOTE: To access the Edit IFB screen, double-click an IFB from the list, the IFB edit screen will
appear. For more information on the Edit IFB screen, see the AZedit Help file.