Telex Azedit, Software Manual

Page: 28 / 182

Telex Communications 28
10. Click Clear All.
All items in the Paste Special screen are deselected.
Note: You must select All Setup Pages, and then deselect All Setup Pages to activate the
Individual Key Settings check boxes.
11. Select All Setup Pages.
All Setup Pages are selected, as well as Individual Key Settings and All Keys are selected.
12. Deselect All Setup Pages.
All Setup Pages are deselected, however, Individual Key Settings and All Keys stays selected.
13. Select All Ports.
All Ports are selected.
14. Under Individual Key Settings, deselect all check boxes, except the Talk Key Restrictions and Listen Key
Restrictions.
15. Under Copy Setup Pages, deselect all check boxes except for the page you are configuring (for example
Page 2 to…).
16. Click Paste.
It may take a few moments to copy the listen key settings for all intercom ports. Once complete, the Paste
Special screen closes.
17. Repeat steps 9 through 16 for all pages.
Once you are finished, you will see all the R boxes are selected on all the pages.
Hints:
• You can save a setup file where you have only configured the R settings. When you want to create a new setup
file, open the R setup file and use Save As to save the file under a new name. Add your other configuration
settings, such as talk key assignments, party lines, etc.
• To add R assignments to the ONLINE configuration, SAVE the ONLINE configuration to disk, and then open it
in FILE mode. Add the R assignments as described. Resave the file. Connect to the intercom system and use
Send File to update the intercom system.