Telex Azedit Software Manual Download Page 118

Page: 118 / 182

Telex Communications

118

Party Line Alphas

Screen Items

Screen Item

Field Type

Description

display column

The PL column displays the system generated party line number. This
number cannot be changed.

Alpha

display column

The Alpha column displays the name of the party line. The default
names may be changed to more meaningful names. The maximum
characters allowed for an alpha is four.

Alias

display column

The Alias column displays the alias of the party line. The alias can be
changed to a

The maximum characters allowed for an alias is four.

Description

display column

The Description column displays a short description of the party line.

Summary of Contents for Azedit























































































































































































Search results

Summary of Contents for Azedit

Reviews:

Related manuals for Azedit

Brands by name

Popular brands

Telex Azedit, Software Manual

Search results

Summary of Contents for Azedit

Reviews:

Related manuals for Azedit

Brands by name

Popular brands