Telex Azedit Software Manual Download Page 155 | Manualshive

Page: 155 / 182

background image

Telex Communications

155

L

LCP-102 Assignment

Use the

LCP-102 Assignment

to set up an optional LCP-102 Level Control Panel.

LCP key assignment

Use the

LCP Key Assignment

to assign the LCP keys. To change the assignment type the new assignment in the

box for the key of interest, or right click on the assignment of interest and choose the Change Assignment option.

Load File

Load File

lets you select a file from disk, view its contents, and then merge it into the ONLINE configuration, if

desired. The settings in the file that you are loading overwrite any corresponding settings in the online configuration,
and whatever is changed is highlighted in yellow. For example, if you load a file that contains only settings for
intercom port 1, you will notice that only items for intercom port 1 are highlighted. Note, these changes will NOT be
sent to the intercom system until you use the Send Changes command.

Generally, use Load File when you want to merge into the ONLINE configuration a file that was saved using the
Partial Save command. You can either use the Send Changes command to send the partial changes to the intercom
system or use the Save command from the File menu to create a new disk file that contains both current settings
from the intercom system and previously saved settings from a partial intercom file.

Load File is only available in ONLINE mode.

Note:

If your real intention is to completely overwrite the ONLINE configuration using a file from

disk, you should use Send File (also located in the Online menu).

Local party line tallies

Use

Local Party Line Tallies

when two or more keypanels have keys assigned to talk to the same party line. For

example, two different keypanels have the same party line assigned to a talk key. If one of the keypanels activates
the party line talk key, the tally indication will be supplied at the other keypanel.

Typically, the tally indication is in the form of a flashing alphanumeric display (KP9x series keypanels) or a
continuously lit, red LED talk key indicator (most other keypanels). The tally indication tells the keypanel operator that
activating the party line key will break in on a conversation that is in progress.

Log to File

When

Log to File

is selected from the Logging menu all talk and listen key activity is logged to a file on disk.

«
...
153
154
155
156
157
...
»

Summary of Contents for Azedit























































































































































































Reviews:

No comments

Related manuals for Azedit

Brand: DAVIS Pages: 20

ANTIVIR VIRUS SCAN ADAPTER

Brand: AVIRA Pages: 29

DocuColor 45054549

Brand: Xerox Pages: 30

Brand: Extreme Networks Pages: 546

ExtremeWare 7.5

Brand: Extreme Networks Pages: 2546

Brand: Aastra Pages: 46

DIMAGE VIEWER 2.1

Brand: Minolta Pages: 84

Brand: Philips Pages: 2

Brand: Philips Pages: 2

Cineos 42PF9831D

Brand: Philips Pages: 3

Brand: Philips Pages: 2

37-LCD 37PF9431D

Brand: Philips Pages: 3

37-LCD 37PF9431D

Brand: Philips Pages: 3

Brand: Philips Pages: 16

37-LCD 37PF9431D

Brand: Philips Pages: 201

Brand: FujiFilm Pages: 55

Brand: LEI accessories Pages: 116

Loopfactory AN200

Brand: Yamaha Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands