Telex Azedit Software Manual Download Page 89

Page: 89 / 182

Telex Communications

Note: When No Key is assigned as the key type, the Key
Type column will be blank.

Status

column display

The Status column displays whether the GPI Input is activated,
ON; otherwise, OFF will display. This information will periodically
update.

To force an update:

1. From the View menu, select Refresh.

The display status field updates.

Or, press Ctrl+Space from the keyboard.

NOTE: To access the Edit GPI In screen, double-click a GPI In from the list, the Edit GPI In screen

appears. For more information on the Edit GPI In screen, see the AZedit Help file.

Right-Click Guide to the GPI Input Screen

Built into AZedit are many different ways to get to the same information, by buttons, menus, and right-clicking. The
following is a list of menus and screens you can access by right clicking from the GPI Input main screen.

Highlight GPI Input > Right Click

A popup menu appears that gives you the following
options:

Info: The information contained here shows the GPI
Input, Description, Keypanel, Description (keypanel), Key
Number and Type.

From the Navigation menu, you can:

Go to GPI Output view
Go to GPI Output Alpha view
Go To GPI Input Alpha view

From the Changes Menu, you can

Clear all changes to this GPI Input /all GPI Inputs..,.-
clears all the changes you have made up to the last
Save performed.

From the Search menu, you can:
Search for panels with this ISO assigned…

Note: You must be connected to the

Intercom for some of these menus to
work.

Right-click anywhere on the screen

A popup menu appears that gives you the options to:

Undo: reverses the last action--for example, to undo a
deletion, thus restoring deleted text to a document.

Redo: will redo up to 20 consecutive changes that you
previously canceled with the Undo Button.

Go Back: lets you go back to previously viewed screens
(up to 20).

Go Forward: lets you go forward again when you have
used Go Back to look at previously viewed screens.

Search: From the Search popup menu, you can:
Search for this panel (opens the Search Status Screen)

Summary of Contents for Azedit























































































































































































Search results

Summary of Contents for Azedit

Reviews:

Related manuals for Azedit

Brands by name

Popular brands

Telex Azedit, Software Manual

Search results

Summary of Contents for Azedit

Reviews:

Related manuals for Azedit

Brands by name

Popular brands