2470 High Voltage SourceMeter Instrument Reference Manual
Section 14: TSP command reference
2470-901-01 Rev. A /
May
2019
14-181
status.operation.condition
This attribute reads the Operation Event Register of the status model.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
operationRegister
= status.operation.condition
operationRegister
The status of the operation status register; a zero (0) indicates no
bits set; other values indicate various bit settings
Details
This command reads the contents of the Operation Condition Register, which is one of the Operation
Event Registers.
For detail on interpreting the value of a register, see
(on page B-15).
Example
print(status.operation.condition)
Returns the contents of the register.
Also see
(on page B-7)
status.operation.enable
This attribute sets or reads the contents of the Operation Event Enable Register of the status model.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (RW)
Yes
status.preset()
Not applicable
0
Usage
operationRegister
= status.operation.enable
status.operation.enable = o
perationRegister
operationRegister
The status of the operation status register
Details
This command sets or reads the contents of the Enable register of the Operation Event Register.
When one of these bits is set, when the corresponding bit in the Operation Event Register or
Operation Condition Register is set, the OSB bit in the Status Byte Register is set.
