Section 4: Sourcing and measuring
2470 High Voltage SourceMeter Instrument Reference Manual
4-104
2470-901-01 Rev. A /
May
2019
Determining the size of a configuration list
You can view the number of configuration indexes that are in a specific configuration list.
Using SCPI commands:
To view the number of configuration indexes in a source configuration list named
MyConfigList
,
send the following command:
:SOURce:CONFiguration:LIST:SIZE? "MyConfigList"
For a measure configuration list, replace
:SOURce
with
:SENSe
.
Using TSP commands:
To view the number of configuration indexes in a source configuration list named
MyConfigList
,
send the following command:
smu.source.configlist.size("MyConfigList")
For a measure configuration list, replace
source
with
measure
.
Saving a configuration list
Configuration lists are lost when you turn the instrument off and turn it on again or if you reset the
instrument. Save a configuration list by creating a configuration script (with TSP command
createconfigscript()
or front panel) or using the
*SAV
and
*RCL
commands (SCPI). A
configuration script saves the settings of the instrument, including all defined source and measure
configuration lists. See
(on page 3-45) for additional information.
