Tektronix Keithley SourceMeter 2470, Reference Manual

Page: 746 / 995

Section 14: TSP command reference 2470 High Voltage SourceMeter Instrument Reference Manual
14-106 2470-901-01 Rev. A /
May
2019
Details
The
scriptVar .run()
function runs the script referenced by
scriptVar
. You can also run the
script by using
scriptVar()
.
Example
test8.run()
Runs the script referenced by the variable
test8
.
Also see
None
scriptVar.save()
This function saves the script to nonvolatile memory or to a USB flash drive.
Type TSP-Link accessible Affected by Where saved Default value
Function No
Usage
scriptVar .save()
scriptVar .save(" filename ")
scriptVar
The name of variable that references the script
filename
A string that contains the file name to use when saving the script to a USB flash drive
Details
The
scriptVar .save()
function saves a script to nonvolatile memory or a USB flash drive. The
root folder of the USB flash drive has the absolute path
/usb1/
.
If no
filename
is specified, the script is saved to internal nonvolatile memory. If a
filename
is
given, the script is saved to the USB flash drive.
If you set
scriptVar
to
autoexec
, the script is run when the instrument powers up. You must
delete the existing
autoexec
script before saving the new one. Note that performing a system reset
does not delete the
autoexec
script.
You can add the file extension, but it is not required. The only allowed extension is
.tsp
(see
Example 2).
Example 1
test8.save() Saves the script referenced by the variable
test8
to nonvolatile memory.
Example 2
test8.save("/usb1/myScript.tsp") Saves the script referenced by the variable
test8
to a file named
myScript.tsp
on
your USB flash drive.
Also see
Working with scripts (on page 13-5)