![background image](http://html1.mh-extra.com/html/tektronix/59021-10/59021-10_user-manual_1078414065.webp)
Operating Basics
2Ć34
DG2040 Data Generator
6. Save the edited data on the 3.5 inch floppy disk.
a. Insert a formatted 3.5 inch floppy disk in the drive.
b. Name the new file COUNT2.
MenuButton
Bottom Button
PopĆup Menu
Side Button
Front Panel
Button
File
Save Data &
Setup
Clear String
COUNT2
OK
The data in this procedure will be saved in the file COUNT2.PDA.
Tutorial 3 sets all the settings required for signal output and actually outputs the
signals.
1. Set the sampling clock frequency to 500 MHz.
Menubutton
Bottom button
PopĆup menu
Side button
FrontĆpanel
button
Clock
Reference
(Select Int.)
Int FREQ
500
MHz
2. Set the signal generation mode to continuous mode.
Menubutton
Bottom button
PopĆup menu
Side button
FrontĆpanel
button
Run Mode
Repeat
3. Set the channel CH0 to CH1 output levels to 1 V for the high level and –1 V
for the low level.
Tutorial 3: Signal Output
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com