Reference
3Ć80
DG2040 Data Generator
Application Menu
The bottom menu for the APPLICATION menu includes the Edge Control
item. This section describes this item. Table 3-19 lists the functions of the
APPLICATION menu items and the pages where their documentation appears.
Table 3Ć19: APPLICATION menufunctions
Bottom
Side or popĆup menu
Function
Page
Edge Control
Edge Ctrl
Setting the edge control
3Ć83
Position Offset
Setting the edge timing
3Ć83
The DG2040 Data Generator has an edge control function that moves the
specified rising and/or falling edge(s) in the pattern set in the DATA0. The
edge(s) can be specified using the edge control window.
An external edge control signal coming from the EDGE CONTROL input
connector on the front panel moves the specified edge position according to the
edge control transfer function shown in Figure A-2 on page 0-9. When you input
a sine wave to the EDGE CONTROL input connector, the specified edge(s)
move(s) as shown in Figure 3-66.
Edge Control Menu
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com