Getting Started
1Ć8
DG2040 Data Generator
Check the fuse to be sure it is the proper type and rating.
WARNING.
To avoid electrical shock, be sure that the power cord is disconnected
before checking the fuse.
Use a slotted screwdriver to remove the fuse. Push in and turn the fuse holder
cap counterclockwise. See Figure 1-1 for the fuse location.
The instrument order specified either a UL approved or an IEC approved fuse.
Each fuse requires its own cap. See Table
1-5.
Table 1Ć5: Fuse And Fuse Cap Part Numbers
Fuse
Tektronix Fuse
Part Number
Tektronix Fuse Cap
Part Number
0.25 inch
×
1.25 inch (UL 198.6, 3 AG):
6 A fast, 250 V
159Ć0239Ć00
200Ć2264Ć00
5 mm
×
20 mm (IEC 127): 5 A (T), 250 V
159Ć0210Ć00
200Ć2265Ć00
NOTE
. The second fuse listed in the table above is approved under the IEC
standards. This fuse is used in equipment sold in the European market.
Check that you have the proper electrical connections. Refer to Table 1-6 for
power requirements.
Table 1Ć6: AC Line Power Requirements
Name
Description
Line Voltage Range
90 V - 250 V
Line frequency
48 Hz - 440 Hz ( 90 V - 127 V)
48 Hz - 63 Hz (127 V - 250 V)
Maximum power
300 W
Connect the proper power cord from the rear panel power connector to the power
system. Refer to Table 1-2 for power cord identification.
Check Fuse
Check Voltage Settings
Connect Power Cable
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com