Appendix B: Performance Verification
BĆ4
DG2040 Data Generator
Test Procedure Notes
The following conventions are used in this section for describing the self tests
and performance tests.
H
The test items are described in the following order.
H
Characteristic tested
H
Required equipment
H
Connections
H
Test procedure
H
The test procedure is presented in order starting with step 1, and progresses
through the end of the procedure. Tables such as the one shown below appear
in these steps. For these steps, press the buttons in the order shown in the
table, either from left to right or from top to bottom, to select the required
menu item. For pop-up menus, use the general purpose knob to select items
from the menu list. Operations such as Operation 6 do not involve pressing
the buttons shown in the row above, but rather are descriptions of operations
to be performed. Figure B-1 shows the buttons used and the menu layout.
Menubutton
Bottom button
Pop up menu
Side button
Front panel
button
Operation 1
Operation 2
Operation 3
Operation 4
Operation 5
Operation 6 (for example, insert a disk in the disk drive.)
Operation 7
Menu Buttons
Bottom Buttons
Side Buttons
Front Panel Buttons
Side Menu
Bottom Menu
General Purpose Knob
PopĆup Menu
Figure BĆ1: Operating buttons and menu layout
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com