![background image](http://html1.mh-extra.com/html/tektronix/59021-10/59021-10_user-manual_1078414029.webp)
Getting Started
1Ć10
DG2040 Data Generator
NOTE
. Allow a 20 minute warm-up period prior to calibrating the clock for the
instrument to operate at its optimum precision.
ON/STBY Switch
Figure 1Ć2: Location of the ON/STBY switch
The DG2040 automatically runs diagnostics when the instrument is powered on
from the ON/STBY switch. These diagnostics check whether the instrument is
performing within its defined operating characteristics. If all the diagnostic items
have been completed without error, the instrument displays the EDIT menu.
NOTE
. If the instrument chassis temperature is outside the specified operating
range, an error will occur during the power-up diagnostics. If this happens,
power off the instrument, wait until the chassis temperature is within normal
operating range, and then power on the instrument again.
If an error is displayed, contact your Tektronix Field Office or representative.
To power off the DG2040 Data Generator, press the ON/STBY switch.
StartĆUp Diagnostics
Power Off
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com