![background image](http://html1.mh-extra.com/html/tektronix/59021-10/59021-10_user-manual_1078414068.webp)
Operating Basics
DG2040 Data Generator
2Ć37
Tutorial 4 creates four 360-bit blocks and assigns the blocks to sequences, as
shown in Figure 2-26.
Block 1
Block 2
Block 3
Block 4
Block 1 repeats 10 times
Block 4 repeats 20 times
Defined in subsequence
Block 3
Block 4
SUB 1
SUB 1 repeats 2 times
Block 3 repeats continually
The sequence repeats Block 3
infinitely. When an event signal
is input, the sequence jumps to
Block 4.
Figure 2Ć26: Tutorial 4 block sequence
Create the following data patterns for the blocks:
H
Block 1: Binary up-counter pattern
H
Block 2: Data pattern consisting of all zeros
H
Block 3: Binary down-counter pattern
H
Block 4: Data pattern consisting of all ones
1. Clear the data group definitions and pattern data.
Menubutton
Bottom button
PopĆup menu
Side button
FrontĆpanel
button
SETUP
Group Assign
Reset All bits
Assign
OK
EDIT
File
New
OK
Tutorial 4: Creating a
Sequence
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com