![background image](http://html1.mh-extra.com/html/tektronix/59021-10/59021-10_user-manual_1078414157.webp)
Reference
3Ć74
DG2040 Data Generator
Run Mode Menu
This menu sets the run mode used to output pattern data, and sets the pattern data
output update method used when data is changed.
Operation.
Do the following to set the run mode.
Bottom button
PopĆup menu
Side button
Run Mode
Select the run mode
(Repeat, Single, Step,
or Enhanced)
Repeats the pattern data output. When no sequence is defined, all of the pattern
data is output repeatedly as a single pattern as shown in Figure 3-60. If a
sequence is defined, the sequence ordering and repeat (Repeat Count) functions
are applied. The extended sequence functions (trigger input, event jump, and so
on) are ignored as shown in Figure 3-61.
Pattern Data
Pattern Data Output
Pattern Data
Figure 3Ć60: Repeat Mode pattern data output (when no sequence is defined)
BK0 BK1 BK1 BK1 BK2 BK2 BK0 BK1 BK1 BK1 BK2 BK2
BK0
1
BK1
3
BK2
2
BK0
BK1
BK2
0
1
2
0
1
2
2
1
0
Line No.
Block
Repeat Count
Pattern Data
Line No.
Sequence
Output
Sequence
Figure 3Ć61: Repeat Mode pattern data output (when a sequence is defined)
Pattern data is output only once when a trigger input is received. A trigger signal
is received either when the front-panel FORCE TRIGGER button is pressed or
when an external trigger signal is input to the TRIGGER INPUT connector.
Repeat
Single
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com