Operating Basics
DG2040 Data Generator
2Ć31
1. Clear the data definitions.
MenuButton
Bottom Button
PopĆup Menu
Side Button
Front Panel
Button
EDIT
File
New
OK
Follow the steps below to load the Tutorial 1 file from the 3.5 inch floppy disk:
2. Insert the 3.5 inch floppy disk in the instrument’s 3.5 inch floppy disk drive
and complete the actions in the following table.
MenuButton
Bottom Button
PopĆup Menu
Side Button
Front Panel
Button
EDIT
File
Load Data &
Setup
Select the file
COUNT1.PDA
from the file list using the generalĆpurpose knob.
OK
3. Select DATA1 as the area to be edited.
MenuButton
Bottom Button
PopĆup Menu
Side Button
Front Panel
Button
Execute
Action
Set scope
OK
1
OK
Move the knob icon to the
Cursor
window in the upper left area of the screen by
pressing the frontĆpanel
CURSOR
button once or twice.
0
ENTER
Move the knob icon to the
Width
window in the upper left area of the screen by pressing
the frontĆpanel
CURSOR
button once.
1024
ENTER
Press the up and down arrow buttons until the area cursor covers DATA1.
4. Complete the following actions to shift the bits in DATA1 exactly one
sample width to the right.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com