![background image](http://html1.mh-extra.com/html/tektronix/59021-10/59021-10_user-manual_1078414094.webp)
Reference
DG2040 Data Generator
3Ć11
PopĆup Menu.
Figure 3-6 shows the data read-in configuration window. The
parameters that appear in this window differ depending on which data format
was read in.
Figure 3Ć6: Import Configuration Menu (File format: AWG2000 series waveform file)
Table 3-3 describes the input parameters.
Table 3Ć3: Import parameters
Parameter
Function
Destination
Sets the place where the readĆin data is to be written. Either Pattern
memory or the Paste buffer can be selected. If data is read into the
paste buffer, data can be pasted to the data bit specified by the Paste
item in the Execute Action menu.
Read Point(s)
Sets the number of data points to be read. Data in excess of the
specified memory size cannot be read in.
Source Start
Specifies the starting position from which the data is read in from the
file.
Source MSB
Specifies the position of the MSB from which data in the file will be
read.
Dest Start
Specifies the position which data is read in when pattern memory is the
destination.
Dest MSB
Specifies the position of the MSB to which data will be written when
pattern memory is the destination.
Read type
Sets the data readĆin method when pattern memory is the destination.
Either Insert or Overwrite can be selected.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com