manualshive.com logo in svg

Tektronix 59021-10, User Manual

Share
Download
Tektronix 59021-10 User Manual Download Page 168

Reference

DG2040 Data Generator

3Ć85

The Mass Memory menu is used to access the contents of the 3.5 inch floppy
disk inserted in the instruments disk drive. This menu supports changing and
creating directories, file copying and deleting, and 3.5 inch floppy disk format-
ting.

Change Directory

.

The Change Directory function changes the current directory.

Operation.

Do the following to change the directory.

Bottom button

PopĆup menu

Side button

Mass Memory

Change Directory

Select the directory to switch to.

OK

Make Directory

.

The Make Directory function creates a subdirectory in the

current directory.

Operation.

Do the following to create a directory.

Bottom button

PopĆup menu

Side button

Mass Memory

Make Directory

Enter the name of the directory.

OK

Rename

.

The Rename function changes the name of a file or directory on the 3.5

inch floppy disk. The file extension is not changed by this function.

Operation.

Do the following to change a file or directory name.

Bottom button

PopĆup menu

Side button

Mass Memory

Select the file or directory to be renamed.

Rename
Clear String

Enter the new file or directory name.

OK

Mass Memory Menu

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for 59021-10

































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands