Reference
DG2040 Data Generator
3Ć23
Table 3Ć6: Pattern data display format (Cont.)
Display format menuitem
Description
Set view type to binary
Sets the pattern data display method to the binary format.
Set view type to numeric
Sets the pattern data display method to the numeric
format. In this format, serial data can be displayed in
specified bit width. This means that you can edit parallel
data in specified bit width and expand them into a channel
as serial data.
Show overview
Displays the whole pattern data on allocated memory
area. Editing cannot be performed in this mode.
Pattern data can be created and edited with functions in the EDIT menu.
Pattern Data.
Follow the steps below to create pattern data:
1. Set memory size with EDIT
!
Settings
!
Set memory size. The default
memory size is 1000 words.
2. Specify work area with EDIT
!
Execute Action
!
Set scope and Width
on the screen.
3. Create a pattern with the functions in EDIT
!
Execute Action.
4. Repeat step 2 and 3 until the pattern data that you want is created.
Creating Pattern Data and
Sequences
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com