Reference
3Ć12
DG2040 Data Generator
Table 3Ć3: Import parameters (Cont.)
Parameter
Function
Convert to Bin
When this setting is set to ON, the waveform is compared to a
threshold level and the data is converted to binary. RP binary data from
the Tektronix TDS and TLS series products are read in as RI data. The
data cannot be converted to binary data if it is left in the RP state.
Threshold
Sets the threshold level used to convert readĆin data to binary when the
Convert to Bin parameter is set to ON.
With Marker Data
Sets whether or not marker data is read, in addition to waveform data,
for Tektronix AWG2000 series waveform file format data.
Figures 3-7 and 3-8 show the data write operations in terms of point positions
and data bit positions when pattern memory is the write destination.
Start Position
(
Source Start
)
Number of data
points read
(
Read Points
)
ReadĆin Data
Pattern Memory
ReadĆin Method
(
Read type:Overwrite
)
Initial position where
data is written
(
Dest Start
)
Figure 3Ć7: Data write in terms of point positions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
