Reference
3Ć40
DG2040 Data Generator
Press the EXECUTE button to start the input. Press the front-panel keys to set
the required data values. The kind of input that is possible differs according to
the display format, as shown in Table 3-8.
Table 3Ć8: Numeric input differences
Display Method
Input Position
Numeric Input
Type
Timing
Display of that group data value is selected.
Binary
Table
Data at the object position is displayed highlighted.
Binary
Binary
Data at the object position is displayed highlighted.
Binary
Numeric
Data at the object position is displayed highlighted.
Binary or
Hexadecimal
The input of each data value finishes and the data is set when the number of
input digits is sufficient to set all the bits in the group. You do not need to press
the enter button.
The cursor moves along the data by the number of points in a step for each input
operation when the scope is only one bit deep for binary format. The next input
operation sets the data at the new cursor position for the same group.
However, when the scope is more than one bit deep for binary format, the cursor
does not immediately move. Instead, the next input action will be directed at the
next group down (or to the right). Only when input to the last group in the scope
is complete does the cursor move along the data.
Operation.
Do the following to perform numeric input.
Bottom button
PopĆup menu
Side button
Front Panel button
Executed Action
Numeric input
OK
Set the Points/Step using the general purpose knob.
OK
EXECUTE
Input data using numeric keys.
The DG2040 Data Generator provides several methods for the shifting of data in
a timing, table, or binary display.
Timing.
In a timing display you can shift data using any one of the following:
H
Shift left (add zero)
Shifting
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
