![background image](http://html1.mh-extra.com/html/tektronix/59021-10/59021-10_user-manual_1078414067.webp)
Operating Basics
2Ć36
DG2040 Data Generator
Connect the CH0 and CH1 on the front-panel to the oscilloscope CH1 and
CH2. This requires two SMA cables and two SMA female-to-BNC male
adapters. Connect two SMA terminations to the CH0 and CH1 outputs on
the DG2040 Data Generator front panel. Refer to Figure 2-25.
DG2040 Data Generator
Oscilloscope
CH2
CH0
SMA Cable
SMA
femaleĆtoĆBNC
male adapter
CH1
CH1
SMA termination
Figure 2Ć25: DG2040 Data Generator and oscilloscope connection
6. Press the START/STOP button on the front-panel.
7. Set up the oscilloscope appropriately and observe the pattern signals on the
oscilloscope screen.
8. Save the state of the settings on the 3.5 inch floppy disk.
a. Insert an IBM-formatted 3.5 inch floppy disk in the drive.
b. Name the new file COUNT3.
Menubutton
Bottom button
PopĆup menu
Side button
FrontĆpanel
button
EDIT
File
Save Data &
Setup
Clear String
COUNT3
OK
The data in this procedure is saved to a file named COUNT3.PDA.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com