![background image](http://html1.mh-extra.com/html/tektronix/59021-10/59021-10_user-manual_1078414108.webp)
Reference
DG2040 Data Generator
3Ć25
Output your pattern data using the following steps:
1. Press the START/STOP button on the front panel to start signal output.
2. Press the START/STOP button again to stop output.
Figure 3-14 and 3-15 shows a typical example for operation flow from creating
and editing pattern data to outputting it.
Creating and editing pattern
data and/or sequence
Setting output parameters,
run mode, and trigger
Outputting pattern data
Operations with the Edit menu
and front panel buttons and knob.
Operations with the Setup menu
and front panel buttons and knob.
Operations with the
START/STOP, STEP/EVENT
and FORCE TRIGGER buttons
on the front panel. Operations
can also be performed with
external signals coming from
the remote controller or other
equipment.
Figure 3Ć14: Operation flow for pattern data output #1
Outputting Pattern Data
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com