![background image](http://html1.mh-extra.com/html/tektronix/59021-10/59021-10_user-manual_1078414110.webp)
Reference
DG2040 Data Generator
3Ć27
Specify the bit width from 2 to 32, select BIN or HEX from the display/edit
format, and the MSB/LSB position. These settings can be used for numeric view
format. Refer to Table 3-6 on page 3-23 to set view type to numeric. Refer to
page 2-22 for Parallel/Serial editing.
PopĆup Menu.
Use the general purpose knob or the numeric key to set the bit
width. The value can be set from 2 to 32. Figure 3-16 shows the pop-up menu.
Figure 3Ć16: Bit Width popĆup menu
Operation.
Do the following to set the display format for the numeric view.
Bottom button
PopĆup menu
Side button
Settings
Select numeric view format
FormatĂ(Select BIN or
HEX)
FirstĂ(Select LSB or
MSB)
Set the bit width in the popĆup menu using the general purpose knob or the numeric keys.
OK
Set Numeric View Format
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com