Tadpole SPARCbook 3 series, Reference Manual

Page: 144 / 216

9-26
MODEM
S Registers
S92 Fax Transmit Level
Sets the transmit level, in dBm, for the fax mode. In some
countries, this cannot be changed and there are checks to
prevent transmit level change.
Range: 0 to -15 dBm, Default: 10
S95 Extended Result Code
The bits in this register can be set to override some of the Wn
command options. A bit set to a 1 in this register will enable
a corresponding result code regardless of the Wn setting.
Default: 0
Bit 0 = CONNECT result code indicates DCE speed
instead of DTE speed.
Bit 1 = Append/ARQ to CONNECT XXXX result code
if error correction is on.
Bit 2 = Enable CARRIER XXXX result code
Bit 3 = Enable PROTOCOL XXXX result code
Bit 4 = Reserved
Bit 5 = Enable COMPRESSION result code
Bit 6 = Reserved
Bit 7 = Reserved
S99 Leased Line Transmit Level
Sets the transmit level, in dBm, for the leased line mode. In
some countries this cannot be changed and there are checks
to prevent transmit level change.
Range: 0 to -15 dBm, Default: 10
S3GX_TRMBook Page 26 Friday, September 19, 1997 11:39 am