Suzuki 2000 Grand Vitara SQ416, Service Manual

Page: 407 / 729

YH4
GRAND
VITARA
ENGINE MECHANICAL (H25 ENGINE) 6A2-83
Type 1
Type 2
1. Exhaust No.1 pipe
6) Tighten bolts and nuts of exhaust No.1 pipe to specified torque.
Tightening Torque
(d): 50 N
.
m (5.0 kg-m, 36.5 lb-ft)
7) Install front differential housing with differential to chassis if re-
moved. Refer to Section 7E for installation.
8) Install steering shaft lower assembly. Refer to Section 3C / 3C1
for details.
9) Install A / C compressor ass’y. Refer to Section 1B for details.
10) Install P / S pump ass’y. Refer to Section 3B1 for details.
11) Connect hoses, cables and electric wires.
12) Adjust accelerator cable and A / T throttle cable (for A / T ve-
hicle) according to procedure described in Section 6E2.
13) Refill engine with engine oil referring to item “ENGINE OIL
CHANGE” in Section 0B.
14) Refill cooling system, referring to Section 6B.
15) Check to ensure that all fasteners and clamps are tightened.
16) Upon completion of installation, verify that there is no fuel leak-
age, coolant leakage, P / S fluid leakage or exhaust gas leak-
age at each connection.