Suzuki 2000 Grand Vitara SQ416, Service Manual

Page: 454 / 729

YH4
GRAND
VITARA
1. Crank timing sprocket key
2. Timing mark
1. Crankshaft
2. Crankshaft timing sprocket
1. Idler sprocket
2. Match mark on idler sprocket 3. 1st timing chain
4. Dark blue plate
1. Crankshaft timing sprocket
2. Match mark 3. 1st timing chain
4. Yellow plate
1. Timing chain tensioner
2. Spacer
3. Cylinder block
4. Mark
ENGINE MECHANICAL (J20 ENGINE) 6A4-35
INSTALLATION
1) Check that crank timing sprocket key is in match with timing
mark on cylinder block.
2) Install crankshaft timing sprocket as shown in figure.
Match mark faces to chain cover.
3) Apply oil to bush of idler sprocket.
4) Install sprocket shaft and idler sprocket.
5) Install 1st timing chain by aligning dark blue plate of 1st timing
chain and match mark on idler sprocket.
6) Bring yellow plate of 1st timing chain into match with match mark
on crankshaft timing sprocket.
7) Install timing chain tensioner as shown in figure.
Tightening Torque
(a): 25 N
.
m (2.5 kg-m, 18.5 lb-ft)