YH4
GRAND
VITARA
6-12
ENGINE DIAGNOSIS (G16 / J20 ENGINES)
ENGINE DIAGNOSTIC FLOW TABLE
Refer to the following pages for the details of each step.
STEP
ACTION
YES
NO
1
Customer Complaint Analysis
1) Perform customer complaint analysis.
Was customer complaint analysis performed?
Go to Step 2.
Perform customer
complaint analysis.
2
Diagnostic Trouble Code (DTC) and Freeze Frame
Data Check, Record and Clearance
1) Check for DTC referring to the next page.
Is there any DTC(s)?
1) Print DTC and
freeze frame
data or write then
down and clear
by referring to
“DTC Clearance”
in this section.
2) Go to Step 3.
Go to Step 4.
3
Visual Inspection
1) Perform Visual inspection referring to the “Visual
Inspection” in this section.
Is there any faulty condition?
1) Repair or replace
malfunction part.
2) Go to Step 11.
Go to Step 5.
4
Visual Inspection
1) Perform visual inspection referring to the “Visual
Inspection” in this section.
Is there any faulty condition?
Go to Step 8.
5
Trouble Symptom Confirmation
1) Confirm trouble symptom referring to the “Trouble
Symptom Confirmation” in this section.
Is trouble symptom identified?
Go to Step 6.
Go to Step 7.
6
Rechecking and Record of DTC / Freeze Frame Data
1) Recheck for DTC and freeze frame data referring
to “DTC Check” in this section.
Is there any DTC(s)?
Go to Step 9.
Go to Step 8.
7
Rechecking and Record of DTC / Freeze Frame Data
1) Recheck for DTC and freeze frame data referring
to “DTC Check” in this section.
Is there any malfunction DTC(s)?
Go to Step 10.
8
Engine Basic Inspection and Engine Diagnosis Table
1) Check and repair according to “Engine Basic Check”
and “Engine Diagnosis Table” in this section.
Are check and repair complete?
Go to Step 11.
1) Check and repair
malfunction
part(s).
2) Go to Step 11.
9
Troubleshooting for DTC
1) Check and repair according to applicable DTC diag.
flow table in this section.
Are check and repair complete?
10
Check for Intermittent Problems
1) Check for intermittent problems referring to the next
page.
Is there any faulty condition?
1) Repair or replace
malfunction
part(s).
2) Go to Step 11.
Go to Step 11.
11
Final Confirmation Test
1) Clear DTC if any.
2) Perform final confirmation test referring to the next
page.
Is there any problem symptom, DTC or abnormal
condition?
Go to Step 6.
End.
Summary of Contents for 2000 Grand Vitara SQ416
