Suzuki 2000 Grand Vitara SQ416, Service Manual

Page: 336 / 729

YH4
GRAND
VITARA
2
1
1. EVAP canister purge valve
2. EGR valve
3. EGR pipe
4. EVAP canister purge valve hose 5. Heater hose
6. PCV hose
7. Water hose
8. Breather hose
1. TP sensor coupler
2. MAF sensor coupler
3. IAC valve coupler 4. Earth wires
5. Clamp bracket
1. Injector wire
2. Brake booster hose
1. Accelerator cable
2. A / T throttle cable
3. Water hose
1. Intake air pipe
2. Surge tank pipe
6A2-12 ENGINE MECHANICAL (H25 ENGINE)
7) Install EGR pipe with new gaskets.
8) Connect hoses of EVAP canister purge valve and heater.
9) Connect hoses of PCV, breather and water.
10) Connect couplers of manifold absolute pressure (MAP) sen-
sor, EVAP canister purge valve and EGR valve.
Fix wire harness with clamps.
11) Install clamp bracket to intake collector.
12) Connect earth terminal to intake collector.
13) Connect couplers of TP sensor, MAF sensor and IAC valve.
14) Connect brake booster hose to intake manifold.
15) Connect injector wire coupler.
16) Connect water hoses to throttle body.
17) Connect accelerator cable and A / T throttle cable (for A / T ve-
hicle) to throttle body.
18) Install surge tank pipe to intake manifold with new gaskets and
intake air pipe to throttle body.