YH4
GRAND
VITARA
ENGINE (H25 ENGINE)
6-1-29
SCAN TOOL DATA
CONDITION
NORMAL CONDITION/
REFERENCE VALUE
OTHER
ELECTRIC LOAD
Ignition ON, small light OFF
OFF
:
Ignition switch ON, small light ON
ON
:
VSS (for 4-A/T)
(Vehicle Speed Sensor)
At stop.
0 km/h 0 MPH
:
GEAR POSITION (for 4-A/T)
Ignition switch ON, selector lever is shifted at “R”, “D”, “2”
or “L” range and vehicle stops.
1st
:
THROT POS LEVEL
(Throttle Position Level for 4-A/T)
“0”(about idle position), “1”,“2”,“3”,“4”,“5”,“6” or “7” (about full open) appears according
to throttle valve opening.
:
SHIFT SOL
#
1 (A)
CON (Shift Solenoid
#
1 Com-
mand Signal)
MON (Shift Solenoid
#
1 Monitor)
Ignition switch ON
Selector lever is shifted at “P”, “R”, “N”, “D”, “2” or “L”
range.
Vehicle stops.
ON
:
SHIFT SOL
#
2 (B)
CON (Shift Solenoid
#
2 Com-
mand Signal)
MON (Shift Solenoid
#
2 Monitor)
Ignition switch ON
Selector lever is shifted at “P”, “R”, “N”, “D”, “2” or “L”
range.
Vehicle stops.
OFF
:
TCC SOL
CON (Torque Converter Clutch
Solenoid Command Signal)
MON (Torque Converter Clutch
Solenoid Monitor)
Ignition switch ON
Selector lever is shifted at “P”, “R”, “N”, “D”, “2” or “L”
range.
Vehicle stops.
OFF
:
TRANS RANGE
Ignition switch ON, selector lever is at “R”, “N”, “D”, “2”
R N D 2 or L
:
g
or “L” range.
R, N, D, 2 or L
BRAKE SW
Ignition switch ON, brake pedal is released.
OFF
:
(Brake, Stop Lamp, Switch)
Ignition switch ON, brake pedal is depressed.
ON
O/D OFF SW
Ignition switch ON, overdrive cut switch OFF
OFF
:
(Overdrive Cut Switch)
Ignition switch ON, overdrive cut switch ON
ON
MODE SELECT SW
(Power/Normal Change
Ignition switch ON, P/N change switch is at normal posi-
tion.
NORMAL
:
Switch)
Ignition switch ON, P/N change switch is at power posi-
tion.
POWER
4WD-L SW
(4WD Low Switch)
Ignition switch ON, transfer lever is shifted at “4H” or
“2H” position.
OFF
:
Ignition switch ON, transfer lever is shifted at “4L” posi-
tion.
ON
O / D & TCC OFF SIG
Ignition switch ON, vehicle stops.
OFF
:
BLOWER FAN
Ignition switch ON, blower fan switch OFF
OFF
Ignition switch ON, blower fan switch ON
ON
A / C CONDENSER FAN
A / C is not operated.
OFF
A / C is operated.
ON
Summary of Contents for 2000 Grand Vitara SQ416
