Suzuki 2000 Grand Vitara SQ416, Service Manual

Page: 316 / 729

YH4
GRAND
VITARA
1. Paint
6A1-74 ENGINE MECHANICAL (G16 ENGINE)
2) Next, check bearing cap bore diameter without bearing. On mat-
ing surface of cylinder block, four alphabets are stamped as
shown in figure.
Three kinds of alphabets (“A”, “B” and “C”) represent following
cap bore diameters.
Alphabet stamped
Bearing cap bore diameter
(without bearing)
A
56.000 – 56.006 mm
(2.2047 – 2.2050 in.)
B
56.006 – 56.012 mm
(2.2050 – 2.2052 in.)
C
56.012 – 56.018 mm
(2.2052 – 2.2054 in.)
The first, second, third, fourth and fifth (left to right) stamped al-
phabets represent cap bore diameters of bearing caps “1”, “2”,
“3”, “4” and “5”, respectively.
For example, in figure, the first (leftmost) alphabet “B” indicates
that cap bore dia. of bearing cap “1” is within 56.006 – 56.012
mm, and the fifth (rightmost) alphabet “A” indicates that cap bore
dia. of cap “5” is within 56.000 – 56.006 mm.
3) There are five kinds fo standard bearings differing in thickness.
To distinguish them, they are painted in following colors at the
position as indicated in figure.
Each color indicates following thickness at the center of bearing.
Color painted Bearing thickness
Green
1.998 – 2.002 mm
(0.0787 – 0.0788 in.)
Black
2.001 – 2.005 mm
(0.0788 – 0.0789 in.)
Colorless
(no paint) 2.004 – 2.008 mm
(0.0789 – 0.0790 in.)
Yellow
2.007 – 2.011 mm
(0.0790 – 0.0791 in.)
Blue
2.010 – 2.014 mm
(0.0791 – 0.0792 in.)