YH4
GRAND
VITARA
6-1-28
ENGINE (H25 ENGINE)
SCAN TOOL DATA
CONDITION
NORMAL CONDITION /
REFERENCE VALUE
OTHER
THROTTLE POS
(Absolute Throttle Position)
Ignition switch
ON / warmed up
Accelerator pedal released.
10
5 %
(Absolute Throttle Position)
ON / warmed u
engine stopped.
Accelerator pedal depressed fully.
80
10 %
TP SENSOR VOLT
(TP Sensor Output Voltage)
Ignition switch
ON / warmed up
Accelerator pedal released.
0.35
0.65 V
:
(TP Sensor Out ut Voltage)
ON / warmed u
engine stopped.
Accelerator pedal depressed fully.
3.0
3.8 V
:
OXYGEN SENSOR B1 S1
(HO2S1 Output Voltage)
At specified idle speed after warming up.
0.05
0.95 V
OXYGEN SENSOR B1 S2
(HO2S2 Output Voltage)
When engine is running at 2000 r / min. for 3 min or longer
after warming up.
0.05
0.95 V
OXYGEN SENSOR B2 S1
(HO2S2 Output Voltage)
When engine is running at 2000 r / min. for 3 min or longer
after warming up.
0.05
0.95 V
OXYGEN SENSOR B2 S2
(HO2S2 Output Voltage)
When engine is running at 2000 r / min. for 3 min or longer
after warming up.
0.05
0.95 V
FUEL SYSTEM B1
(Fuel System Status)
At specified idle speed after warming up.
Closed
:
FUEL SYSTEM B2
(Fuel System Status)
At specified idle speed after warming up.
Closed
CALC LOAD
At specified idle speed with no load after warming up.
1.8
3.8 %
(Calculated Load Value)
At 2500 r / min with no load after warming up.
6.0
11.5 %
TOTAL FUEL TRIM B1
At specified idle speed after warming up.
–30
+30 %
:
TOTAL FUEL TRIM B2
At specified idle speed after warming up.
– 30
+30 %
MAP
At specified idle speed after warming up.
25
35 kPa
CANIST PRG DUTY
(EVAP Canister Purge Flow
Duty)
At specified idle speed after warming up.
0
10 %
:
Vehicle Speed
At stop.
0 km / h
0MPH
FUEL CUT
When engine is at fuel cut condition.
ON
:
Other than fuel cut condition.
OFF
:
EGR VALVE
At specified idle speed after warming up.
0 %
:
PSP SWITCH
(if equipped)
Engine running at idle speed and steering wheel at
straightahead position.
OFF
:
Engine running at idle speed and steering wheel
turned to the right or left as far as it stops.
ON
:
A / C SWITCH
When A / C not operating.
OFF
:
(if equipped)
When A / C operating.
ON
:
PNP SIGNAL (Transmission
Ignition switch
Selector lever in “P” or “N” position
P / N Range
Range Switch) A / T only
ON
Selector lever in “R”, “D”, “2” or “L”
position
D Range
:
FUEL TANK LEVEL
Ignition switch ON
0
100 %
:
Summary of Contents for 2000 Grand Vitara SQ416
