Suzuki 2000 Grand Vitara SQ416, Service Manual

Page: 287 / 729

YH4
GRAND
VITARA
1. Valve head thickness
2. 45
_
(1)
(2)
ENGINE MECHANICAL (G16 ENGINE) 6A1-45
INSPECTION
Valve Guides
Using a micrometer and bore gauge, take diameter readings on
valve stems and guides to check stem-to-guide clearance.
Be sure to take reading at more than one place along the length of
each stem and guide.
If clearance exceeds limit, replace valve and valve guide.
Item Standard Limit
Valve stem
In
5.465 – 5.480 mm
(0.2152 – 0.2157 in.)
–
diameter
Ex
5.440 – 5.455 mm
(0.2142 – 0.2148 in.)
–
Valve guide
In
5.500 – 5.512 mm
–
g
I.D.
Ex
(0.2166 – 0.2170 in.)
–
Stem-to-guide
In
0.020 – 0.047 mm
(0.0008 – 0.0018 in.)
0.07 mm
(0.0027 in.)
g
clearance
Ex
0.045 – 0.072 mm
(0.0018 – 0.0028 in.)
0.09 mm
(0.0035 in.)
If bore gauge is not available, check end deflection of valve stem
with a dial gauge instead.
Move stem end in directions (1) and (2) to measure end deflection.
If deflection exceeds its limit, replace valve stem and valve guide.
Valve stem end deflection limit
In 0.14 mm (0.005 in.)
Valve stem end deflection limit
Ex 0.18 mm (0.007 in.)
Valves
D
Remove all carbon from valves.
D
Inspect each valve for wear, burn or distortion at its face and stem
and, as necessary, replace it.
D
Measure thickness of valve head. If measured thickness exceeds
limit, replace valve.
Valve head thickness
Standard Limit
In
0.8 – 1.2 mm
0.6 mm (0.024 in.)
Ex
(0.03 – 0.047 in.)
0.7 mm (0.027 in.)