Suzuki 2000 Grand Vitara SQ416, Service Manual

Page: 536 / 729

YH4
GRAND
VITARA
Rear
side
Rear
side
1. Fuel tank
2. Fuel pump (with fuel
level gauge)
3. Fuel filter
4. Fuel filler cap
5. Breather hose
6. Fuel feed line
(to delivery pipe)
7. Fuel return line (from
delivery pipe)
8. Fuel vapor line (to
EVAP canister)
9. Fuel tank protector
10. Belt
11. Filler neck
12. Breather pipe
13. Filler hose
14. Tank inlet valve
15. Fuel cut valve
16. Fuel tank pressure sensor
1. Fuel filter
2. Fuel filter outlet hose
3. Fuel filter inlet hose
ENGINE FUEL 6C-7
INSTALLATION
1) Install fuel pump assembly and fuel cut valve to fuel tank. Refer
to “FUEL PUMP” in this section.
2) Connect fuel hoses to fuel tank, fuel cut valve and fuel pump as-
sembly.
After connecting, clamp hoses securely.
3) Install inlet valve to fuel tank.
If deformed or damaged in any other way, replace with a new
one.
4) Install fuel tank by using fuel tank belts and then install protector
to vehicle.
Tightening Torque
Fuel tank bolt (a): 50 N
.
m (5.0 kg-m, 36.5 lb-ft)
Fuel tank protector bolt (a): (50 N
.
m (5.0 kg-m, 36.5 lb-ft)
5) Connect fuel filler hose to fuel tank and breather hose to fuel filler
neck. Clamp them securely.
Tightening Torque
Breather hose clamp (b): 2.0 N
.
m (0.2 kg-m, 2.0 lb-ft)
Fuel filler hose clamp (c): 4.0 N
.
m (0.4 kg-m, 3.0 lb-ft)
6) Install fuel filler hose protector.
7) Connect fuel vapor hose (1) and return hose (2) to fuel pipe and
clamp them securely.
8) Connect fuel filter inlet hose to fuel filter.