Suzuki 2000 Grand Vitara SQ416, Service Manual

Page: 373 / 729

YH4
GRAND
VITARA
ENGINE MECHANICAL (H25 ENGINE) 6A2-49
(c)
1, (c)
1. Oil pump drive chain
2. Oil pump sprocket
3. Match mark
1. Oil pump chain guide
2) Install oil pump chain by aligning match marks on oil pump
chain and oil pump sprocket.
3) Install oil pump chain guide and hand-tighten oil pump chain
guide bolts.
4) To take up slack of oil pump chain, push center of oil pump
chain guide with a force of 0.5 to 0.6 N (50 – 60 g, 0.11 – 0.13
lb) then tighten oil pump chain guide bolts to specified torque.
Tightening Torque
(c): 11 N
.
m (1.1 kg-m, 7.5 lb-ft)
5) Install 1st timing chain.
Refer to item “1ST TIMING CHAIN AND CHAIN TENSIONER”
in this section for installation.
6) Install LH bank 2nd timing chain.
Refer to item “LH (NO.1) BANK 2ND TIMING CHAIN AND
CHAIN TENSIONER” in this section for installation.
7) Install timing chain cover.
Refer to item “TIMING CHAIN COVER” in this section for instal-
lation.
8) Install oil pan, front differential housing, P/S system, cooling
system, intake manifold with throttle body and other parts.
9) Refill cooling system with coolant, front differential with gear oil,
P/S system with specified fluid and engine with engine oil.
10) Check wheel alignment referring to Section 3.
11) Verify that there is no fuel leakage, water leakage and oil leak-
age at each connection.