Standard Operating Procedures
L410 UVP-E20
Document No.:
SOP-L410-0
Page EE - 60
Rev: 1
Date:JAN 18
Prepared by: LA
Checked by : CLS
METAL CHIPS IN THE OIL
AB 10
Item
Action
CM
(CHIP signal is illuminated)
Parameters of affected engine
CHECK
●
Continue the flight while paying particular attention to the parameters of affected engine.
If the oil temperature is above the maximum limit:
POWER of affected engine
REDUCE AS REQUIRED If
the parameters of affected engine continue to fluctuate:
PERFORM ENGINE Shut Down in flight
UNTER
UNFAVOURABLE
FLIGHT
CONDITION
SUCH AS
ICING;
THUNDERSTORM;
MOUTAINS, ETC. or
FLYING
ON
ONE
ENGINE:
●
Set the power of affected engine to a level at which the main parameters will remain within
the permissible limits.
If it proves impossible to set power to such a level:
●
If flying on both engines, stop the malfunctioning engine and land at the nearest airfield.
If flying on one engine, do not stop the engine but carry out a procedure FORCED LANDING
Summary of Contents for L410 UVP-E20
Page 5: ......
