Standard Operating Procedures
L410 UVP-E20
Document No.:
SOP-L410-0
Page AA -9
Rev: 0
Date: Jul 17
Prepared by: TRI
Checked by: TM
Destination:
The same code system as for Origin is used for Destinations.
ETE:
Estimated time En-route, this field will accept data in the format of hoursand minutes. This
information will be used to calculatethe ETA displayed for flight tracking.
Ex: 2:35 (= 2hours and 35 minutes). No leading 0 is required.
POB:
People on board, this field requires a number between 1 and 999.
Ex.: 12(=12 people on board).
NOTE that people on boardrefers to everyone including the crew (as opposed topassengers on
board) and infants
.
Fuel on Board:
This field will accept the hours of fuel remaining on the aircraftin hours and
minutes format.
Ex.: 3:15 (3 hours and15 minutes of fuel remaining)
Cruising Altitude:
This field requires a 1-5 digit number, and is represented infeet.
Ex. 9500 (= cruising altitude will be 9.500 feet)
Departure Time:
This field will accept data in the format of a 24 hour clock. Thisinformation will be
used to calculate the ETAdisplayed on SkyRouter.
Ex. 13:30 (= departure set for 13:30 or 1:30PM).
Thetime used for this entry is to be UTC, and does NOT need to be exact; it shall bethe best
estimate of takeoff time by the crew at the time of engine start. The timewill be automatically
updated with the real departure time after takeoff by theBluesky system.
Summary of Contents for L410 UVP-E20
Page 5: ......
