Standard Operating Procedures
L410 UVP-E20
Document No.:
SOP-L410-1
Page 4 - 13
Rev: 1
Date: JAN 18
Prepared by: LA
Checked by: CLS
4.10. After Start
The following values are for reference only and based on standard ISA and sealevel. For the
correct values, crew shall refer to the aircraft AFM.
Engine idle values
Ng
57-60 %
ITT
Max 550 °C
Prop
920 ± 60 RPM
Torque
At least 8%
Oil Temp.
Min -20°C
Oil pressure
≥
1,2 Kp/cm
2
After the start procedures of both engine has been succesfully accomplished, both pilots carry
out separate flows for the set up of the following items:
•
overhead panel
•
CWD panel
•
avionics
•
tune and identify navaids
•
trims
•
arm spoiler, ABC and autofeather
•
test the autopilot
•
bluesky
•
ice protection
After both pilots completed their flows, the Captain will call for the after start checklist. The
response of certain items had to be done by both crew members.
Summary of Contents for L410 UVP-E20
Page 5: ......
