SusiAir L410 UVP-E20, Standard Operating Procedures

Page: 17 / 280

Standard Operating Procedures
L410 UVP-E20
Document No.:
SOP-L410-1
Prelim. Page xvii
Rev: 1 Date: Jan 18 Prepared by: LA Checked by : CLS
CHAPTER SUBJECT PAGE
7.17.1 Callouts Page 7-14
7.17.2 AP/FD use on ILS Approaches Page 7-16
7.17.3 Altitude Selector Use on ILS a Approaches Page 7-17
7.18 Non-Precision Instruments Approaches Page 7-17
7.18.1 Non-Precision Instrument Approaches General Page 7-18
7.18.2 Approach Preparations for CANPA Page 7-18
7.18.3 AP/FD use on CANPA Approaches Page 7-19
7.18.4 Altitude Selector Use on CANPA Approaches Page 7-20
7.18.5 Final Approach Using VS Page 7-20
7.18.6 Minimum Descent Altitude MDA(H) Page 7-21
7.19 CANPA Callout Table Page 7-22
7.20 Missed Approach Page 7-25
7.20.1 Missed Approach Callout Table Page 7-25
7.21 Circling Approach Page 7-26
7.21.1 AP/FD use on a Circking Approach Page 7-27
7.21.2 Altitude Selector Use on a Circling Approach Page 7-27
7.21.3 Obstruction Clearance Circling Approach Page 7-27
7.21.4 Circling Category Page 7-28
7.21.5 Reference Landing Approach Speeds Page 7-28
7.21.6 Missed Approach - Circling Page 7-30
7.22 Visual Approach Page 7-31
7.23 Landing Flow Items Page 7-32
7.24 Landing Checklist Page 7-32
7.25 Landing Page 7-33
7.26 Rejected Landing Page 7-34
7.27 After Landing Flow Items Page 7-35
7.28 When Clear of Runway Check list Page 7-36
7.29 Engine Cooldown Page 7-37