SusiAir L410 UVP-E20, Standard Operating Procedures

Page: 140 / 280

Standard Operating Procedures
L410 UVP-E20
Document No.:
SOP-L410-1
Page 7- 23
Rev: 1 Date: JAN 18 Prepared by: LA Checked by : CLS
At FAF (if applicable)
PM: “FINAL APPROACH FIX, ”
PF: “MDA _____ FEET SET”
PM: “___ FEET, CHECKED and
SET.”
Call made by PM when at FAF.
PF sets the MDA and calls the
altitude.
PM checks and sets theMDA.
Selecting missed approach altitude
on ALT SEL PF: “SET MISSED APPROACH
ALTITUDE”
PM: “MISSED APPORACH
ALTITUDE SET”
PF request altitude as per plate
PM sets missed approach
altitude.
Prior to 1,500 feet AGL, crew confirm the
final configuration for landing.
Note :
If flap 42 is used, AP & YD must me
disconnected
PF: “FLAP 42”
PM: “SPEED CHECK ED, FLAP 42
SELECTED”
PM: “FLAPS 42”
PF “CHECK”
IF REQUIRED
PF request flap 42.
PM selects flap as requested.
Landing Checklist at 1,500 feet AGL PF: “LANDINGCHECKLIST”
PM: “LANDING CHECKLIST”
PM “LANDING CHECKLIST
COMPLETE”
PF request the checklist
PM reads the checklist and then
calls for checklist complete.
At the outer Marker/beacon/4 nm DME,
whichever is applicable
PF: “OUTER MARKER ____ FT”
PM: “CHECK” or calls the
deviation.
Eg. “100 feet high”
Call made by PF on passing
The outer marker.
Crew shall checkaudio and
altitude at the outer marker.
at 1,000 ft AGL PM: “one thousand feet, stable”
or
PM: “one thousand feet, not
stable, go around”
Called made by the PM.
If the PM calls not stable, PF
must initiate go around. Refer
to go around procedure
7.20,1