Subaru impreza 2017, Owner'S Manual

Page: 568 / 786

Binary events are generated in Event function blocks EVENT:1 to EVENT:20 in
the IEDs. The EVENT function blocks have predefined LON addresses. Table
427
shows the LON addresses to the first input on the EVENT function blocks.
Addresses to the other inputs on the EVENT function block are consecutive after
the first input. For example, input 15 on EVENT:17 function block has the address
1280 + 14 (15-1) = 1294.
For double indications, only the first eight inputs 1–8 must be used. Inputs 9–16
can be used for other types of events at the same EVENT block.
Three EVENT function blocks EVENT:1 to EVENT:3 running with a fast loop
time (3 ms) are available as basic in the IEDs.. The remaining EVENT function
blocks EVENT:4 to EVENT:9 run with a loop time of 8 ms and EVENT:10 to
EVENT:20 run with a loop time of 100 ms. The EVENT blocks are used to send
binary signals, integers, real time values like analogue data from measuring
functions and mA input modules as well as pulse counter signals.
16 pulse counter value function blocks PCFCNT:1 to PCFCNT:16 are available in
the IEDs.
The first LON address in every EVENT function block is found in table 427 . The
formula for calculating the LON address is:
LON Address = (EVBlkNr-1)×16 + si1023
For instance, the first pin at Event block number 2 has the address: (2-1)×16 +1
+1023 = 1040
Table 427: LON adresses for EVENT functions
Function block First LON address in
function block
EVENT:1 1024
EVENT:2 1040
EVENT:3 1056
EVENT:4 1072
EVENT:5 1088
EVENT:6 1104
EVENT:7 1120
EVENT:8 1136
EVENT:9 1152
EVENT:10 1168
EVENT:11 1184
EVENT:12 1200
EVENT:13 1216
EVENT:14 1232
EVENT:15 1248
EVENT:16 1264
Table continues on next page
Section 14
1MRK 505 384-UEN A
Station communication
562 Breaker protection REQ650 2.2 IEC
Technical manual