Subaru impreza 2017, Owner'S Manual

Page: 555 / 786

14.5.4 Settings
SEMOD166625-1 v2
PID-6850-SETTINGS v3
Table 422: MU1_HW Non group settings (basic)
Name Values (Range) Unit Step Default Description
CTStarPoint1 FromObject
ToObject
- - ToObject ToObject= towards protected object,
FromObject= the opposite
CTStarPoint2 FromObject
ToObject
- - ToObject ToObject= towards protected object,
FromObject= the opposite
CTStarPoint3 FromObject
ToObject
- - ToObject ToObject= towards protected object,
FromObject= the opposite
CTStarPoint4 FromObject
ToObject
- - ToObject ToObject= towards protected object,
FromObject= the opposite
14.5.5 Monitored data
PID-6850-MONITOREDDATA v3
Table 423: MU1_HW Monitored data
Name Type Values (Range) Unit Description
MUDATA BOOLEAN 0=Ok
1=Error
- Fatal error, data not
received, transmission
errors, time-sync issues
or inconsistent sample
rate
SYNCH BOOLEAN 0=Ok
1=Error
- High when IED clock is
not within configured
accuracy or time domain
SMPLLOST BOOLEAN 1=Yes
0=No
- Fatal error or recovery
state after fatal error.
High if any subscribed
channel has bad quality
or TEST while IED not in
test mode.
MUSYNCH BOOLEAN 0=Ok
1=Error
- MU not synced or MU
clock not synced to
same clock as IED
TESTMODE BOOLEAN 1=Yes
0=No
- Quality of one or more
subscribed analogue
channels is TEST
SIMMODE BOOLEAN 1=Yes
0=No
- MU delivers simulated
data accepted by IED
BadReference BOOLEAN 1=Yes
0=No
- BadReference indication
output for I1
Derived BOOLEAN 1=Yes
0=No
- Derived indication output
for I1
Failure BOOLEAN 1=Yes
0=No
- Failure indication output
for I1
Inaccurate BOOLEAN 1=Yes
0=No
- Inaccurate indication
output for I1
Inconsistent BOOLEAN 1=Yes
0=No
- Inconsistent indication
output for I1
Table continues on next page
1MRK 505 384-UEN A
Section 14
Station communication
Breaker protection REQ650 2.2 IEC 549
Technical manual