3-2
920017-148
Operator Manual
Component Identification
3.2 Control Location
3.2.2 POWER-OFF/
STANDBY Switch
3.2.1 LOCK/UNLOCK/INIT
Key Switch
Figure 3-2. Load End
Control Panel and Printer
POWER-
OFF/
STANDBY
Switch
Printer
Display
Screen
PRINT/PRINT
VALUES
Switch
POWER
OFF
STANDBY
Become familiar with all control locations and functions before operating the unit
(see Figures 3-1 and 3-2).
LOCK/UNLOCK/INIT key switch is located on both control panel doors and
includes three positions :
±
• LOCK
– To lock washer for maintenance purposes, use key to turn
selector switch to the left. Positioning selector switch to LOCK position
places the washer in locked mode. The operator cannot start a new
cycle or enter into the Service mode.
²
• UNLOCK
– Use key to turn selector switch to central position to unlock
washer. Positioning switch to UNLOCK enables the washer to function
normally.
•
•
•
•
•
INITIALIZATION
– Use key to turn selector to the right to reset washer
normal operation after Emergency Stop Cables or Emergency Stop
Button were activated, after a power up, or a power failure.
NOTE : Selector returns automatically from reset to UNLOCK position when key
is released.
The POWER-OFF/STANDBY switch, located behind the printer door, includes
two settings which direct operation of the control (see Figure 3-1 and 3-2):
• POWER
– Press top portion of POWER-OFF/STANDBY
switch to initialize control and place control in Ready Mode.
• OFF/STANDBY
– Press bottom portion of POWER-OFF/
STANDBY switch to initiate Shutdown Cycle and place
control in Standby Mode.
NOTE: Control should be placed in Standby Mode for last cycle of the day and
when washer is not in use for an extended period of time.
IMPORTANT:
POWER-OFF/STANDBY switch does not turn off electrical power
to the unit.
