1-3
Safety Precautions and Symbols
Operator Manual
920017-148
CAUTION – POSSIBLE EQUIPMENT DAMAGE (Cont'd):
Do not process load using Central Header Manifold or Bottle Washing Cart in a chamber where Automatic Floor
Tilting option is activated. If Automatic Floor Tilting is used, manifolded water inlet and washer will be damaged.
Keep away from doors to prevent load detection sensor from stopping doors from closing.
Remove all cellulose-type bedding from cages and pans before processing. Cellulose bedding can clog filters
and piping.
Use non-abrasive cleaners when cleaning unit. Follow directions on containers and rub in a back-and-forth motion,
in same direction as surface grain. Abrasive cleaners will damage stainless steel. Cleaners rubbed in a circular
motion or applied with a wire brush or steel wool on door and chamber assemblies can be harmful to stainless steel.
Do not use these cleaners on painted surfaces.
When choosing a chemical, select one with a low chloride content. Chloride is harmful to stainless steel and will
deteriorate washer.
