3-4
920017-148
Operator Manual
Component Identification
• Manual Operation Touch Pads:
EXTEND CYCLE
Touch Pad – Available in Service Mode only.
ALARM REPLY
Touch Pad – Press to stop intermittent alarm buzzer and
acknowledge the displayed alarm message.
DOOR OPEN
Touch Pad – Press to automatically open door(s).
DOOR CLOSE
Touch Pad – Press to automatically close door(s).
• Program Touch Pads:
CHANGE VALUES (CVTP)
Touch Pad – Press to modify treatments from
programmed cycles and to confirm selected values from programmed cycles.
CURSOR (left or right)
Touch Pad- Press to move left or right on the display
screen.
VALUE (up or down)
Touch Pad – Press to move up or down on the display
screen and, depending on selected item, press to either toggle between answer
selections or to scroll through the alphabet, numbers 0 through 9, and symbols.
NOTE: Alphabet includes characters for an underline and a space ( ).
SAVE VALUES (SVTP)
Touch Pad – Press to store all treatment values and
cycle changes.
The printer, located on the right side of the load end, records all cycle data on
57 mm (2-1/4 inch) wide single-ply thermal paper. See Section 6,
Routine
Maintenance, for paper changing and paper ordering information.
Printer Function Switch
The Printer Function Switch controls two printer functions, PRINT and PRINT
VALUES:
•
•
•
•
•
– Pressing the top portion of the rocker switch
generates a complete printout of the current water tempera-
ture of sump, and air temperature in drying chamber.
•
•
•
•
•
PRINT VALUES
– Pressing the bottom portion of the rocker
switch generates a complete printout of all cycle values,
including all treatments values, of selected cycle (cycle
flashing in Cycle Menu when PRINT VALUES was pressed)
(see Figure 3-6).
EXTEND
CYCLE
ALARM
REPLY
DOOR
OPEN
DOOR
CLOSE
CHANGE
VALUES
SAVE
VALUES
CURSOR
VALUE
VALUES
3.3.3 Printer
