5-3
Cycle and Control Value Programming
Operator Manual
920017-148
5.2 Change Values
Mode
SELECT
CYCLE
CYCLE
MENU
The Change Values Mode allows authorized operators to modify treatment
values of existing cycles or modify miscellaneous operating values.
All the values can be secured (or "locked-out") using a supervisor Access Code.
In Change Values Mode, cycles are modified or created by selecting a
treatment, then by modifying its values. The process is repeated for each
selected treatment until a customized cycle is completed.
Treatment values appear on the display screen in a sequential order which is
the same for all preprogrammed or custom cycles.
Treatments may be bypassed by setting time values to 0 except for PRE-WASH
and EXHAUST.
NOTE: In the following sequence, tank and chemical names used are default
factory-set names. Tank and chemical names may be changed in Service Mode
to meet customer needs (see Section 4 of Maintenance Manual
[P764-330-842]).
The following procedure shows how to modify a cycle.
1.
Position POWER/OFF-STANDBY switch, located behind printer door, to
POWER. Unit name temporarily appears on the screen. Display shows:
*
STERIS
*
*
BASIL 9502
*
... then, the first Cycle Menu appears. Display shows:
RODENTS
BOTTLES
RABBITS
PRIMATES
__indicates flashing position.
NOTE: To scroll through available cycle menus, press
CYCLE MENU
touch
pad.
2.
Press
SELECT CYCLE
touch pad until desired cycle name flashes.
Display shows:
RODENTS
BOTTLES
RABBITS
PRIMATES
__indicates flashing position.
3.
If Access Code feature is enabled, operator must enter Access Code
before entering Change Values Mode.
5.2.1 Sequence of
Display Screens
5.2.2 How to Modify a
Cycle
Factory-set
Cycles
