6-3
Routine Maintenance
Operator Manual
920017-148
NOTE: Always clean unit from load side.
1.
After last cycle of the day, allow unit to cool down.
2.
On load side of washer, turn LOCK/UNLOCK/INIT key selector to LOCK
position. Remove the key from the selector and keep on yourself. Red
indicator light above control panel starts flashing. Display shows:
WASHER LOCK
... and printer prints:
----------------------------------------------------
WASHER LOCK
HH:MM:SS
YY/MM/DD
----------------------------------------------------
3.
Using a damp cloth, clean door panels, door windows and exterior of unit.
4.
Using the key, turn LOCK/UNLOCK/INIT to UNLOCK position. Remove the
key from selector and keep on yourself. Red indicator light above control
panel stops flashing and display shows:
RODENTS
BOTTLES
RABBITS
PRIMATES
__ indicates flashing position.
5.
When indicator light above control panel turns green, press
DOOR OPEN
touch pad to open load side doors.
6.2.1 Daily Cleaning
6.2 Cleaning
Procedures
WARNING – PERSONAL IN-
JURY AND/OR EQUIPMENT
DAMAGE HAZARD: Before
servicing or cleaning exte-
rior of unit, always turn
LOCK/UNLOCK/INIT key se-
lector to LOCK position to
de-energize unit. Keep the
key on yourself.
±
CAUTION – POSSIBLE
EQUIPMENT DAMAGE: Use
non-abrasive cleaners when
cleaning unit. Follow direc-
tions on containers and rub
in a back-and-forth motion,
in same direction as surface
grain. Abrasive cleaners will
damage stainless steel.
Cleaners rubbed in a circu-
lar motion or applied with a
wire brush or steel wool on
door and chamber assem-
blies can be harmful to stain-
less steel. Do not use these
cleaners on painted surfaces.
²
DOOR
OPEN
